Concentration Meters, Catharometer | SAPRE https://www.sapre.fr/en/produits/concentration-meters/ Conception et Fabrication de détecteurs de fuite de gaz Mon, 27 Apr 2026 20:14:49 +0000 en-GB hourly 1 https://wordpress.org/?v=6.6.5 https://www.sapre.fr/wp-content/uploads/2015/03/logo250-60x60.png Concentration Meters, Catharometer | SAPRE https://www.sapre.fr/en/produits/concentration-meters/ 32 32 TG DISPLAY https://www.sapre.fr/en/products/tg-display/ Mon, 27 Jan 2020 10:16:00 +0000 https://www.sapre.fr/?post_type=portfolio&p=10456 TG DISPLAY HELIUM & ARGON CONCENTRATION METER HELIUM & ARGON CATHAROMETER The TG DISPLAY is a catharometer-type concentration meter for Helium and Argon, mainly used for so-called “under-enclosure” tightness control. In the same range: For Helium or Argon concentration measurement in a fixed station with sampling or continuous measurement, the MCB 97T3 is the 19″ […]

Cet article TG DISPLAY est apparu en premier sur SAPRE.

]]>

TG DISPLAY

HELIUM & ARGON CONCENTRATION METER

HELIUM & ARGON CATHAROMETER

The TG DISPLAY is a catharometer-type concentration meter for Helium and Argon, mainly used for so-called “under-enclosure” tightness control.

In the same range:

For Helium or Argon concentration measurement in a fixed station with sampling or continuous measurement, the MCB 97T3 is the 19″ rack catharometer concentration meter with ATEX cell, 0/1V analog output and extended measurement range from 0.1% to 100%. For Helium or Argon leak detection and localization (rather than concentration measurement), the TG EXPERT is the suitable catharometer leak detector.

TG DISPLAY mesureur de concentration Hélium et Argon catharomètre - SAPRE
  • Concentration reading from 1% to 100%.
  • Measuring cell with unsaturable thermal conductivity.
  • 3-digit digital display.

2 Calibrations :

  • Pre-calibrated device for helium and argon with selection button.
  • Other calibrations possible on request.
 
INFORMATION REQUEST
Find this product here: Find our gas leak detectors on HelloPro - B2B network
Functions

Helium/Argon gas selector.

Manual zero by push button.

Display3-digit digital display.
SensorMeasuring cell with unsaturable thermal conductivity.
Detected gasesHelium, Argon, other gases on request.
SensitivityDirect measurement of gas concentration from 1% to 100%.
Autonomy6-8h
Power supplyBuilt-in rechargeable batteries. Charging time around 12 hours.
Delivered withDetector delivered complete in transport case with mains charger and instructions for use.
Optionn/a

Cet article TG DISPLAY est apparu en premier sur SAPRE.

]]> OX DISPLAY https://www.sapre.fr/en/products/ox-display/ Mon, 27 Jan 2020 10:01:00 +0000 https://www.sapre.fr/?post_type=portfolio&p=10458 OX DISPLAY OXYGEN CONCENTRATION METER The OX DISPLAY is an Oxygen concentration meter, mainly used for measuring oxygen concentration in soldering or passivation applications. In the same range: For Helium or Argon concentration measurement mainly used in under-enclosure tightness testing, the TG DISPLAY is the dedicated catharometer concentration meter, with a measurement range from 1% […]

Cet article OX DISPLAY est apparu en premier sur SAPRE.

]]>

OX DISPLAY

OXYGEN CONCENTRATION METER

The OX DISPLAY is an Oxygen concentration meter, mainly used for measuring oxygen concentration in soldering or passivation applications.

In the same range:

For Helium or Argon concentration measurement mainly used in under-enclosure tightness testing, the TG DISPLAY is the dedicated catharometer concentration meter, with a measurement range from 1% to 100%.

OX DISPLAY mesureur de concentration oxygène pour brasure et passivation - SAPRE
  • Concentration reading from 0.01% to 25.0%.
  • Displays oxygen level up to 100 ppm.
  • 3-digit digital display.

Automatic compensation :

  • Automatic compensation of sensor sensitivity based on ambient temperature.

2 Sampling tips :

  • Inlet/outlet push-in tip for supply tube connection.
  • Rigid needle type pipe tip.
INFORMATION REQUEST
Find this product here: Find our gas leak detectors on HelloPro - B2B network
Functions

Automatic compensation.

Calibration by manual zero on ambient air 20.9%.

Interchangeable sampling tips.

Display3-digit digital display.
SensorElectrochemical oxygen cell, lifespan of approximately 2 years.
Detected gasesO2 / Oxygen.
Sensitivity

Direct measurement of gas concentration from 0.01% to 25.0%.

Displays oxygen level up to 100 ppm (0.01%).

Autonomy6-8h
Power supplyBuilt-in rechargeable batteries. Charging time around 12 hours.
Delivered withDetector delivered complete in transport case with mains charger and instructions for use.
Optionn/a

Cet article OX DISPLAY est apparu en premier sur SAPRE.

]]> MCB 97T3 https://www.sapre.fr/en/products/mcb-97t3/ Mon, 27 Jan 2020 09:31:00 +0000 https://www.sapre.fr/?post_type=portfolio&p=10460 MCB 97T3 HELIUM & ARGON CONCENTRATION METER HELIUM & ARGON CATHAROMETER The MCB 97T3 is a concentration meter, catharometer type, for Helium and Argon, measuring the concentrations of binary or pseudo-binary gas mixtures from 0.1% to 100%. In the same range: For portable, one-off Helium or Argon concentration measurement, the TG DISPLAY is the dedicated […]

Cet article MCB 97T3 est apparu en premier sur SAPRE.

]]>

MCB 97T3

HELIUM & ARGON CONCENTRATION METER

HELIUM & ARGON CATHAROMETER

The MCB 97T3 is a concentration meter, catharometer type, for Helium and Argon, measuring the concentrations of binary or pseudo-binary gas mixtures from 0.1% to 100%.

In the same range:

For portable, one-off Helium or Argon concentration measurement, the TG DISPLAY is the dedicated portable catharometer concentration meter, mainly used for under-enclosure tightness testing.

MCB 97T3 mesureur catharomètre Hélium Argon rack 19 pouces - SAPRE
  • Concentration reading from 0.1% to 100%.
  • ATEX unsaturable thermal conductivity measuring cell.
  • Rack 19″ 3U, 21TE
  • 3-digit digital display.

Calibration :

  • Device pre-calibrated for helium.
  • Other calibrations possible on request.
INFORMATION REQUEST
Functions

19’’ rack drawer, 3U, 21TE.

2 types of cell assembly (depending on version) :

  • Remote cell connected by cable with gas circulation by natural convection.
  • Cell fixed to the rear of the box with cap and end caps for connecting tubes for gas supply.
Display

3-digit digital display.

Analog output 0/1 volt.

2 setpoint relays [+] and [-] with adjustable threshold, with T/R contact outputs.

SensorATEX unsaturable thermal conductivity cell.
Detected gasesFactory calibration on Helium gas, other gas on request (Argon, etc.)
SensitivityConcentration reading from 0.1% to 100%.
Autonomyn/a
Power supplyMains supply 220v, 50/60 Hz.
Delivered withDetector delivered complete with pluggable screw terminal blocks and instructions for use.
Optionn/a

Cet article MCB 97T3 est apparu en premier sur SAPRE.

]]>