Refrigerant Gas Leak Detector for HFC, HFO, and HC Gases | SAPRE

DXR 240

Wed, 19 Feb 2025 12:50:00 +0000

DXR 240

REFRIGERANT GAS LEAK DETECTOR HFO, HFC, HC & N2/H2 TRACER GAS, FORMING GAS & NIDRON

The DXR 240 is a portable gas leak detector for the detection of all refrigerant gases (HFC, HFO, HC), the N2/H2 tracer gas mixture or nidron. Designed for leak testing by sniffing at atmospheric pressure.

In the same range:

For dedicated H2/N2 forming gas or Nidron detection, choose the DXH 240 with its 4 sensitivity positions and Track mode. For specific CO2 and R744 detection using infrared technology, choose the IRD 92 E with its 4-digit digital display. For tightness control on production lines or expert applications, the MTD 920 provides automatic calibration and estimated leak rate reading.

Accessories:

For quick sensitivity verification, use the FT 92-T test leak (5 g/year, R134a/R1234ze/R1234yf) delivered with verification certificate. For EN 14624-compliant calibration, the FCE 99M-PVS-R calibrated leak comes with certificate and pressure-temperature/leak flow correspondence curve.

Leak detector for the detection of refrigerant gases and N2/H2 tracer gas.
Selection of gas type.
Graphical display with ramp allowing efficient localization of leak points.

3 Sensitivity positions : HI, MED, LOW.

2 Detection sensors type :

Detection sensor for all refrigerant gases HFO, HFC, HC (1234ze, R134a, R404, R407, R410, R32… R290, R600, NH3)
Selective detection sensor for N2/H2 tracer gas mixture.

Find this product here :

Functions	Gas type selector HFC, HFO, HC, H2/N2. 3 sensitivity positions HI, MED, LOW. Automatic zero on the ambient atmosphere. Contamination-saturation indication. Illuminating LED at the top of the box to illuminate dark detection areas. Replaceable and interchangeable detection cell.
Display	Graphic display with ramp and progressive sound signal.
Sensor	Electrochemical.
Detected gases	Sensor for all refrigerant gases: HFC (R134a, R404, R407, R410, R32…), HFO (R1234ze, R1234yf…), R600, R290, N2/H2. Specific tracer gas sensor: N2/H2, NIDRON.
Sensitivity	HFC, HFO : 1 g/yr. R600 & R290 : 0.5 g/yr. N2/H2 tracer gas mixture, NIDRON: 1.10-5 cc/s [equivalent approx. 1 g/yr refrigerant gases].
Autonomy	8h
Power supply	Built-in rechargeable batteries. Charging time around 12 hours. USB Type C charging socket.
Delivered with	Detector delivered complete in transport case with mains charger and instructions for use.
Option	n/a

Cet article DXR 240 est apparu en premier sur SAPRE.

HRD 92 SC

Tue, 28 Jan 2020 13:01:00 +0000

HRD 92 SC

REFRIGERANT GAS LEAK DETECTOR

HFO, HFC, HC & N2/H2 TRACER GAS & NIDRON

The HRD 92 SC is a portable gas leak detector for the detection of all refrigerant gases (HFC, HFO, HC), the N2/H2 tracer gas mixture or nidron. Designed for leak testing by sniffing at atmospheric pressure.

In the same range:

For portable use with graphic display and 3 sensitivity positions, the DXR 240 is the direct alternative on the same gases HFC, HFO, HC and H2/N2. For specific H2/N2 forming gas or Nidron detection without refrigerant function, the DXH 240 offers 4 sensitivity positions and 2 detection modes.

Accessories:

For quick HRD 92 SC sensitivity verification, use the FT 92-T test leak (5 g/year, available in R134a/R1234ze/R1234yf) delivered with verification certificate. For testing compliant with the EN 14624 standard, use the FCE 99M-PVS-R calibrated leak at 5 g/year value.

Industrial detector for the detection of refrigerant gases and N2/H2 tracer gas.
Selection of gas type.
Graduated light bar allowing estimation of the detected leak.

3 Sensitivity positions : x1, HI, LOW.

2 Detection blocks type :

Detection block for all refrigerant gases HFO, HFC, HC (1234ze, R134a, R404, R407, R410, R32… R290, R600, NH3)
Selective detection block for N2/H2 tracer gas mixture.

Option : Lighting detection block.

Find this product here:

Functions	Gas type selector. 3 sensitivity positions. Automatic zero on the ambient atmosphere. Contamination-saturation light. Interchangeable detection block.
Display	Graduated light bar with audible signal.
Sensor	Electrochemical.
Detected gases	Block for all refrigerant gases: HFC (R134a, R404, R407, R410, R32…), HFO (R1234ze, R1234yf…), R600, R290, N2/H2. Specific tracer gas block: N2/H2, NIDRON.
Sensitivity	HFC, HFO : 1 g/yr. R600 & R290 : 0.5 g/yr. N2/H2 tracer gas mixture, NIDRON: 1.10-5 cc/s [equivalent approx. 1 g/yr refrigerant gases].
Autonomy	6h
Power supply	Built-in rechargeable batteries. Charging time around 12 hours.
Delivered with	Detector delivered complete in transport case with mains charger and instructions for use. Protective rubber sock included.
Option	Lighting block.

Cet article HRD 92 SC est apparu en premier sur SAPRE.

HRD 92 E

Mon, 27 Jan 2020 12:16:00 +0000

HRD 92 E

REFRIGERANT GAS LEAK DETECTOR HFO, HFC, HC & H2/N2

FORMING GAS, N2/H2 TRACER GAS & NIDRON

The HRD 92 E is a portable gas leak detector for the detection of refrigerant gases (HFC, HFO, HC), the H2/N2 tracer mixture (forming gas). Designed for leak testing by sniffing at atmospheric pressure.

In the same range:

For portable use more focused on field inspection with graphic display and 3 sensitivity positions, the DXR 240 is the direct alternative on the same gases HFC, HFO, HC and H2/N2. For high-sensitivity tightness control on production lines or expert use, the MTD 920 provides automatic calibration on a calibrated leak and displays the estimated leak rate value.

Accessories:

For testing compliant with the EN 14624 standard, use the FCE 99M-PVS-R calibrated leak at 5 g/year. For verification with a specific leak rate on other gases, use the FCH 99M-PVA-R150 adjustable calibrated leak with its built-in tank, delivered with a pressure/flow curve.

Industrial detector for the detection of refrigerant gases and H2/N2 tracer gas.
Selection of gas type.
Graduated graphic ramp allowing an estimation of the leak detected.

2 Detection Modes :

AUTO mode.
TRACKING mode.

2 Detection blocks type :

Detection block for all refrigerant gases HFO, HFC, HC (1234ze, R134a, R404, R407, R410, R32… R290, R600, NH3)
Selective detection block for H2/N2 tracer mixture.

Functions	Gas type selector. 3 sensitivity positions. AUTO detection mode & TRACKING mode with manual zero on the ambient atmosphere. Contamination-saturation indication. Interchangeable detection block.
Display	Graphic touch screen. Graduated graphic ramp with sound signal.
Sensor	Electrochemical.
Detected gases	Block for all refrigerant gases: HFC (R134a, R404, R407, R410, R32…), HFO (R1234ze, R1234yf…), R600, R290, H2/N2. Specific tracer gas block: H2/N2, NIDRON.
Sensitivity	HFC, HFO : 1 g/yr. R600 & R290 : 0.5 g/yr. H2/N2 tracer gas mixture, NIDRON: 1.10-5 cc/s [equivalent approx. 1 g/yr refrigerant gases].
Autonomy	4h
Power supply	Built-in rechargeable batteries. Charging time around 12 hours.
Delivered with	Detector delivered complete in transport case with mains charger and instructions for use. Protective rubber sock included.
Option	Lighting block. Adjustable pipe 30cm.

Cet article HRD 92 E est apparu en premier sur SAPRE.

MTD 920

Mon, 27 Jan 2020 11:46:00 +0000

MTD 920

GAS LEAK DETECTOR FOR EXPERTISE AND PRODUCTION

REFRIGERANT GASES HFC, HFO, HC & H2/N2 TRACER GAS

The MTD 920 is a multi-gas leak detector for high-sensitivity leak testing in expertise and production applications (HFC, HFO, HC & H2/N2 forming gas).

In the same range:

For portable use, in production or expert applications, with graphic display and 3 sensitivity positions on the same gases HFC, HFO, HC and H2/N2, the DXR 240 is the direct alternative. For specific H2/N2 forming gas or Nidron detection, the DXH 240 offers 4 sensitivity positions and 2 detection modes.

Accessories:

For automatic MTD 920 calibration, use the FCE 24-PVA-DR adjustable calibrated leak with its dual tank (R134a, R1234ze, R1234yf, R32). For calibration on other gases including H2/N2, use the FCH 99M-PVA-R150 adjustable calibrated leak with its built-in tank.

Industrial expertise and production detector for the detection of refrigerant gases and N2/H2 tracer gas.
Graphic screen with display of the estimated value of the leak detected.
Automatic calibration on calibrated leak.

2 Detection modes :

SAMPLE mode.
TRACKING mode.

2 Type of detection cells :

Cell for all refrigerant gases HFO, HFC, HC (1234ze, R134a, R404, R407, R410, R32… R290, R600, NH3)
H2 selective cell for N2/H2 tracer mixture.

Functions	Reading the estimated value of the leak detected. Selection of the gas to detect from a list of gases. SAMPLE detection mode with auto zero & TRACKING mode with manual zero on the ambient atmosphere. Automatic calibration. User configurable sensitivity profiles.
Display	Color graphic screen. Graphic light bar with sound signal. Indication of ambient contamination.
Sensor	Universal electrochemical cell: HFO & HFC, R600 & R290, H2/N2 tracer mixture. Electrochemical cell N2/H2 tracer mixture: hydrogen selective cell.
Detected gases	Universal HFC, HFO, R600, R290, N2/H2 cell or H2 specific cell for N2/H2 tracer gas mixture.
Sensitivity	3.10-6 cc/s or 0.3 g/yr (R134a equivalent) for the N2/H2 tracer gas mixture. 0.3 g/yr for R134a & HFC. 0.3 g/yr for R1234ze & HFO. 0.1 g/yr for R290. 0.1 g/yr for R600.
Autonomy	8h with internal battery option.
Power supply	110v/220v mains power adapter block.
Delivered with	Detector delivered complete with power cable and instructions for use.
Option	Internal battery, 8h autonomy.

Cet article MTD 920 est apparu en premier sur SAPRE.

MTD 930

Mon, 27 Jan 2020 11:31:00 +0000

MTD 930

GAS LEAK DETECTOR FOR PRODUCTION LINE

REFRIGERANT GASES HFC, HFO, HC & N2/H2 TRACER GAS

The MTD 930 is a multi-gas leak detector for high-sensitivity leak testing for production applications (HFC, HFO, HC & H2/N2 forming gas).

In the same range:

For use in both expert applications and production, with 2 detection modes (Measure and Tracking) on the same gases HFC, HFO, HC and H2/N2, the MTD 920 is the versatile alternative combining laboratory leak analysis and production control.

Accessories:

For automatic MTD 930 calibration, use the FCE 24-PVA-DR adjustable calibrated leak with its dual tank (R134a, R1234ze, R1234yf, R32). For calibration on other gases including H2/N2, use the FCH 99M-PVA-R150 adjustable calibrated leak with its built-in tank.

Industrial production detector for the detection of refrigerant gases and N2/H2 tracer gas mixture.
Sensor with high detection performance.
Graphic screen with display of the estimated value of the leak detected.
Automatic calibration on calibrated leak.

2 Type of detection cells :

Cell for all refrigerant gases HFO, HFC, HC (1234ze, R134a, R404, R407, R410, R32… R290, R600, NH3)
H2 selective cell for N2/H2 tracer gas mixture.

Functions	Reading the estimated value of the leak detected. Selection of the gas to detect from a list of gases. Automatic calibration. User configurable sensitivity profiles.
Display	4-line LCD graphic screen. Light bar with audible signal associated with 3 tones. Indication of ambient contamination.
Sensor	Universal electrochemical cell: HFO & HFC, R600 & R290, N2/H2 tracer gas mixture. Electrochemical cell N2/H2 tracer gas mixture: hydrogen selective cell.
Detected gases	Universal HFC, HFO, R600, R290, N2/H2 cell or H2 specific cell for N2/H2 tracer gas mixture.
Sensibilité de gaz	3.10-6 cc/s or 0.3 g/yr (R134a equivalent) for the N2/H2 mixture. 0.3 g/yr for R134a & HFC. 0.3 g/yr for R1234ze & HFO. 0.1 g/yr for R290. 0.1 g/yr for R600.
Autonomy	8h with internal battery option.
Power supply	Mains power supply from 100v to 250v, 50/60 Hz, 50W.
Delivered with	Detector delivered complete with power cable and instructions for use.
Option	Internal battery, 8h autonomy.

Cet article MTD 930 est apparu en premier sur SAPRE.